Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- professoren_webseiten:rebholz:course_a_power_electronics [2025/02/06 15:50] – [Reactive Current] hrebholz
+++ professoren_webseiten:rebholz:course_a_power_electronics [2025/03/06 20:59] (aktuell) – [Simulink] hrebholz
@@ Zeile 203: / Zeile 203: @@
 The power PCB is controlled with the help of a Simulink experiment. The microcontroller exchanges data cyclically with the PC via the serial interface.\\
+Dowload the lastes Simulink experiment to control the DIY Power PCB: {{ :professoren_webseiten:rebholz:vorlage_course_a_basis_v01_2021b.zip |Simulink Version 2021b}}
+{{ :professoren_webseiten:rebholz:control_pannel_simulink.png?direct&1000 |}}
-- Connection, COM- Port, Start, Stop
+If you can not establish a connection to the board double check the COM port settings.
+For safety reasons (PC protection) please always us an isolation device: [[https://wiki.ei.htwg-konstanz.de/professoren_webseiten/rebholz/diypowerpcb#isolation|Link]]
 ===== Before you start =====
@@ Zeile 430: / Zeile 433: @@
 The reduction of the reverse recovery effect can be seen by measuring the current through the MOSFETs with a Rogowski coil. If you don't have one, it is also possible to look at the drain-source voltage of the low-side MOSFET. \\
-{{ :professoren_webseiten:rebholz:reverse_recovery.png?direct&600 |}}
+{{ :professoren_webseiten:rebholz:reverse_recovery1.png?direct&600 |}}