Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- professoren_webseiten:rebholz:course_a_power_electronics [2025/02/07 08:17] – [Reactive Current] hrebholz
+++ professoren_webseiten:rebholz:course_a_power_electronics [2025/04/09 14:20] (aktuell) – [Hardware Introduction] hrebholz
@@ Zeile 140: / Zeile 140: @@
 The PCB was originally not only developed for the power electronics lecture but also to drive different motor applications. Therefore, the PCB contains more features than are necessary for your measurements.
-Download: {{ :professoren_webseiten:rebholz:schematic_diy_power_pcb.pdf |}}
+Schematic and PCB files see: [[professoren_webseiten:rebholz:diypowerpcb|]]
 <WRAP center round todo 80%>
@@ Zeile 203: / Zeile 203: @@
 The power PCB is controlled with the help of a Simulink experiment. The microcontroller exchanges data cyclically with the PC via the serial interface.\\
+Dowload the lastes Simulink experiment to control the DIY Power PCB: {{ :professoren_webseiten:rebholz:vorlage_course_a_basis_v01_2021b.zip |Simulink Version 2021b}}
+{{ :professoren_webseiten:rebholz:control_pannel_simulink.png?direct&1000 |}}
-- Connection, COM- Port, Start, Stop
+If you can not establish a connection to the board double check the COM port settings.
+For safety reasons (PC protection) please always us an isolation device: [[https://wiki.ei.htwg-konstanz.de/professoren_webseiten/rebholz/diypowerpcb#isolation|Link]]
 ===== Before you start =====